Razberi DV200 User Manual page 39

7.2.3.3 SNMP
The SNMP (Simple Network Management Protocol) setting can be found under
this path: System> Network> SNMP.
With Simple Network Management Protocol (SNMP) support, the IP Camera
can be monitored and managed remotely by the network management system.
SNMP v1/ v2
Enable SNMP v1/ v2

Select the version of SNMP to use by checking the box.
Read Community

Specify the community name that has read-only access to all supported
SNMP objects. The default value is "public".
Write Community

Specify the community name that has read/write access to all supported
SNMP objects (except read-only objects). The default value is "write".
Traps for SNMP v1/ v2
Traps are used by the IP Camera to send massages to a management system
for important events or status changes.
Enable Traps

Check the box to activate trap reporting.
Trap address

Enter the IP address of the management server.
Trap community

Enter the community to use when sending a trap message to the
management system.
Trap Option
Warm Start

A Warm Start SNMP trap signifies that the SNMP device, i.e. IP Camera,
performs software reload.
38
razberi technologies™