Razberi DV200 User Manual page 37





Use PPPoE
For the PPPoE users, enter the PPPoE Username and Password into the fields,
and click on the <Save> button to complete the setting.
Advanced
Web Server port

The default web server port is 80. Once the port is changed, the user
must be notified the change for the connection to be successful. For
instance, when the Administrator changes the HTTP port of the IP
Camera whose IP address is 192.168.0.100 from 80 to 8080, the user
must type in the web browser "http://192.168.0.100:8080" instead of
"http://192.168.0.100".
RTSP port

The default setting of RTSP Port is 554; the setting range is from 1024
to 65535.
MJPEG over HTTP port

The default setting of MJPEG over HTTP Port is 8008; the setting range
is from 1024 to 65535.
36
This is necessary for network identification.
Subnet mask
It is used to determine if the destination is in the same subnet. The
default value is "255.255.255.0".
Default gateway
This is the gateway used to forward frames to destinations in
different subnet. Invalid gateway setting will fail the transmission to
destinations in different subnet.
Primary DNS
Primary DNS is the primary domain name server that translates
hostnames into IP addresses.
Secondary DNS
Secondary DNS is a secondary domain name server that backups
the primary DNS.
razberi technologies™