Razberi DV200 User Manual page 40

Click on <Save> button when complete.
7.2.3.4 UPnP
The UPnP setting can be found under this path: System> Network> UPnP.
UPnP Setting
Enable UPnP

When the UPnP is enabled, whenever the IP Camera is presented to the
LAN, the icon of the connected IP Cameras will appear in My Network
Places to allow for direct access.
Enable UPnP port forwarding

When the UPnP port forwarding is enabled, the IP Camera is allowed to
open the web server port on the router automatically.
Friendly name

Set the name for the IP Camera for identity.
NOTE: To enable this function, please make sure the UPnP
component is installed on your computer. Please refer to
UPnP components for UPnP component installation procedure.
NOTE: To enable this function, please make sure that your
router supports UPnP and it is activated.
Install
39
razberi technologies™