Appendix B Hardware Settings; Openvox Communication Co. Ltd - OpenVox D210P User Manual

Appendix B
Span 1
Span 2

OpenVox Communication Co. LTD.

Hardware settings
If there is only one card in PCI slot,CardID switch
should be set to 0,And adding a card the switch
value should be add "1". For example, there
are two cards, it is need to set the first card's
switch value to 0 and the second set to 1
Each DIP Switch controls one span
configuration for E1 or T1 mode.Setting
DIP1 to ON means span1 will be
E1.Setting DIP1 to OFF means span1
will be T1.
D210P/DE210P on DAHDI User Manual
Mode Switch
DIP1:ON:Digium Compatible Model-use wct4xxp directly
OFF:OpenVox dedicate model-use openvox driver
DIP2: ON:Force PCI Burst On,this model will omit noburst
parameter in wct4xxp,always keep using PCI Burst model
OFF:PCI Burst controlled by driver.Burst controlled by
noburst parameter in wct4xxp(default is off)
URL: www.openvox.cn
25