Table of Contents
Advertisement
D210P/DE210P. If it has been recognized, "communication controller"
will be displayed in the output information like that:
01:03.0 Communication controller: Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card
3.3V (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort-
>SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 209
Region 0: Memory at dcdffc00 (32-bit, non-prefetchable) [size=128]
If D210P/DE210P is not recognized by the system, you have to power off
and take out the card, then try to insert it into other PCI slot.
2. Software installation
Some dependencies are crucial. If any of them is absent, the software
installation process would not go through successfully. Let's run "yum
install XX" (XX stands for the dependency's name) to check the
availability of dependencies.
# yum install bison
# yum install bison-devel
# yum install ncurses
# yum install ncurses-devel
OpenVox Communication Co. LTD.
D210P/DE210P on DAHDI User Manual
Figure 3 Hardware detection
13
URL: www.openvox.cn
Advertisement
Table of Contents
