Table of Contents
Advertisement
2. Country mode modification
In order to match your country pattern, you need to change parameters
loadzone and defaultzone to your country. For example, your system is in
CHINA, you would like them change to:
loadzone = cn
defaultzone = cn
Some zonedata is available in the file
.. /dahdi-XX/tools/zonedata.c, you can refer to it to match
your country mode. Meanwhile, you also need to modify
another parameter which is in file
/etc/asterisk/indications.conf.
country=cn
A part of file /etc/asterisk/dahdi-channels.conf is showed as below.
(Modification, if it is not agree with the hardware setup)
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
context=from-internal
switchtype = euroisdn
signalling = pri_net
channel => 1-15,17-31
context = default
group = 63
OpenVox Communication Co. LTD.
D210P/DE210P on DAHDI User Manual
Figure 5 A part of dahdi-channels.conf
18
URL: www.openvox.cn
Advertisement
Table of Contents
