Adjustable Asba Seats - Invacare TDX SC Operator And Maintenance Manual

SECTION 5—WHEELCHAIR OPERATION

Adjustable ASBA Seats

NOTE: For this procedure, refer to
FIGURE 5.10.
1. Turn the adjustment lock lever to
release the joystick mounting tube from
the mounting bracket.
2. Remove the joystick from the wheelchair.
3. Remove the three hex screws that
secure both halves of the mounting
bracket to the arm tube.
4. Reposition mounting bracket on
opposite arm tube ensuring the
threaded plate of the mounting bracket
is on the inside of the arm tube as
shown in FIGURE 5.10.
5. Using the three hex mounting screws and washers, secure both halves of the mounting
bracket to the arm tube.
6. Slide the joystick mounting tube through the mounting bracket to the desired position.
7. Turn the adjustment lock lever to secure the joystick mounting tube into the mounting
bracket.
TDX® SC TDX® Spree
Mounting
Bracket
Washers
Adjustment
Lock Lever
Hex Mounting
Screws
FIGURE 5.10 Repositioning Joystick -
Adjustable ASBA Seats
44
Mounting Bracket
(Threaded Plate)
Arm Tube
NOTE:
Joystick
not shown.
Joystick Mounting Tube
Part No 1149267