Oki Microline 520 Service Handbook page 191

Factory default settings are printed in Bold Italic.
The tables show all possible menu settings available with the Microline 520/521.
What you will actually see depends on the active emulation and the options installed.
Group
Rear Feed Line Spacing
Form Tear-Off
Skip Over Perforation
Page Width *
Page Length
Gap Control
Bottom Feed Line Spacing
Form Tear-Off
Skip Over Perforation
Page Width *
Page Length
Gap Control
Top Feed Line Spacing
Form Tear-Off * * * * * * *
Bottom Margin
Page Width *
Page Length
Gap Control
Wait Time
* Model 521 only
* * Appears only when Microline emulation is selected
* * * Appears only when optional Cut Sheet Feeder is installed
* * * * Appears only when IBM Proprinter emulation is selected
* * * * * Appears only when Epson LQ emulation is selected
* * * * * * Appears only when optional Serial Interface is installed
* * * * * * * Appears only when optional Roll Paper Stand is installed
Microline 520/521 Service Handbook
P/N 59257803
Item
6 , 8 LPI
Off , 500 ms, 1 sec, 2 sec
No , Yes
13.6" , 8"
11 , 11 2/3, 12, 14, 17, 3, 3.5, 4, 5.5, 6, 7, 8, 8.5 "
Auto Gap , Semi Auto Gap, 1, 2, 3, 4, 5, 6, 7, 8, 9
6 , 8 LPI
Off , 500 ms, 1 sec, 2 sec
No , Yes
13.6" , 8"
11 , 11 2/3, 12, 14, 17, 3, 3.5, 4, 5.5, 6, 7, 8, 8.5 "
Auto Gap , Semi Auto Gap, 1, 2, 3, 4, 5, 6, 7, 8, 9
6 , 8 LPI
Off , 500 ms, 1 sec, 2 sec
Valid , Invalid
13.6" , 8"
11 , 11 2/3, 12, 14, 17, 3, 3.5, 4, 5.5, 6, 7, 8, 8.5 "
Auto Gap , Semi Auto Gap, 1, 2, 3, 4, 5, 6, 7, 8, 9
1 sec , 2 sec, 500 ms
3 - 79
Setting
Maintenance