Feeding The Fuel - TOHATSU MFS 25B Owner's Manual

1. Air vent screw
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to over flow.
4. After filling the tank, close the tank cap.
For USA and Canada model
1. Full open the air vent screw on the tank
cap and release internal pressure.
1. Air vent screw
2. Tab lock
1
2. Loosen the tank cap until it contacts
3. Fill the fuel carefully not to over flow.
ENOF00027-0
4. After filling the tank, close the tank cap
ENOM00044-0
ENOF00028-0
Except for USA and Canada
model
1. Full open the air vent screw on the tank
2. Open the fuel tank cap slowly and
3. Connect the fuel connector to the
1
2
ENOF00029-0
ENGINE OPERATION
the tab lock and release internal pres-
sure completely. After that, press down
the tab lock and open the tank cap.
until two clicks sound is heard.

2. Feeding the fuel

cap.
release internal pressure completely.
After that, close the fuel tank.
engine and squeeze primer bulb until it
becomes stiff to feed fuel to carburetor.
Direct arrow mark upward when prim-
ing.
33
ENOF00030-0