TOHATSU MFS 25B Owner's Manual page 55

Hide thumbs Also See for MFS 25B:
Table of Contents

Advertisement

 If the boat veers toward the right, direct
the trim tab towards A.
 If the boat veers toward the left, direct
the trim tab towards B.
B
A
1. Trim tab
ENON00022-0
Notes
 The trim tab also acts as an anode to
prevent electrolytic corrosion. Therefore
do not paint or grease this part.
 After adjustment securely tighten the
trim tab fixing bolt.
 Check for looseness of the bolt and the
trim tab at regular intervals.
ENON00023-0
Note
Due to corrosion, the trim tab will wear
down over time.
The trim tab should be replaced when it has
eroded 2/3 of it's regular size.
ENOW00075-0
WARNING
 Inappropriate adjustment of trim tab
could cause steering difficulty. After
installing or readjusting trim tab, check
if steering load is even.
 Tighten trim tab bolt to specified torque.
ENOW00076-0
WARNING
 Be sure that outboard motor is secured
to transom or service stand, or acciden-
tal drop or fall of outboard motor could
lead to severe personal injury.
 Be sure to lock outboard motor if it is
tilted up, or accidental fall of outboard
motor could lead to severe personal
injury.
 Do not go under outboard motor tilted
up and locked, or accidental fall of out-
board motor could lead to severe per-
sonal injury.
1
ENOF00079-0
55
ADJUSTMENT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents