TOHATSU MFS 25B Owner's Manual page 47

3
1
2
1. Tilt down position
2. Tilt up position
3. Reverse lock lever
ENOW00053-0
CAUTION
While in shallow water drive position, do
not operate the outboard motor in reverse.
Operate the outboard motor at slow speed
and keep the cooling water intake sub-
merged.
1
1. Sub water inlet
ENOW00054-0
CAUTION
Do not overtilt outboard motor when driv-
ing shallow water, or air may be sucked
through subwater inlet, potentially leading
to engine overheating.
ENOM00065-0
MGF, EFG type (Gas Assist type)
ENOM00066-0
Tilt up
Move (UP) lock lever to "Free" position.
Fully tilt up the outboard motor. While
keeping the outboard motor in full tilt up
position, move, (DOWN) lock lever to
"Lock" position.
For safety, set the tilt stopper into the set-
ENOF00062-0
up position, although the outboard motor
is kept in the tilt up position after the lock
lever is moved (DOWN) to "Lock" position.
ENOM00067-0
Tilt down
Move (UP) lock lever to "Free" position.
Release the tilt stopper from the set-up
position while slightly tilting up outboard
motor. Release outboard motor down to
thrust rod. Move (DOWN) lock lever to
"Lock" position after the outboard motor is
completely tilted down.
ENOF00063-0
1. Free position
2. Lock position
ENOW00055-0
Do not tilt up or down outboard motor
when swimmer(s) or passenger is near to
prevent them from being caught between
ENGINE OPERATION
1
2
WARNING
47
ENOF00064-0