Laserdyne RMU User Manual page 59

:
User's Manual
Black Opal Models RMU
Flat Panel Display Systems
Char
K enable remote button mode
P press power button (OFF only)
X disable remote button mode
3
Remote button mode allows the user to use the RMU's buttons as inputs to another host
(e.g. a PC). In this mode, the RMU buttons do not function as part of the RMU GUI, but
instead send out via the RS232 comms connection as &n↵, where n is the character
corresponding to the button as shown in the table. To return to normal operation, either send
X to the RMU, or press the RMU – and + buttons simultaneously (causing &X↵ to be output).
UM-RMU-M-0288-0_1
Result
3
3
20.10.05 TW/TW
Response
all button presses will
cause response
&K↵
codes only (no RMU
GUI operation)
&P↵
restores normal local
button operation
(same as pressing –
&X↵
and + buttons
simultaneously)
Note
Page C-2