Laserdyne RMU User Manual page 37

:
User's Manual
Black Opal Models RMU
Flat Panel Display Systems
B2.7.2 For VGA
B2.7.3 Create a Screen Lay-out
B2.7.4 Reboot the System
B2.7.5 Set the System to Standby
B2.7.6 Enable/Disable Jagged-edge Compensation
B2.7.7 Restore Factory-set Defaults to Set-up and
LIST OF FIGURES
Figure B-1: Set-up Menu Structure (high level menus)
Figure B-2: Video/Input Menu Structure
Figure B-3: Video/Correction Menu Structure
Figure B-4: Video/Adjust Menu Structure
Figure B-5: VGA/Input Menu Structure
Figure B-6: VGA/Adjust Menu Structure
Figure B-7: Output/Lay-out Menu Structure
Figure B-8: Output/Motion Menu Structure
UM-RMU-M-0288-0_1
B2.7.2.1 Correct Native Image for Blanking
B2.7.2.2 Correct Native Image for Contrast,
Brightness and/or Phase
B2.7.2.3 Correct Native Image for Position
and/or Frequency
B2.7.3.1 Set the Number of Lay-outs in the
Lay-out Sequence
B2.7.3.2 Load an Existing Lay-out
B2.7.3.3 Modify the Current Screen Lay-out
B2.7.3.3.1 In General
B2.7.3.3.2 Move the Picture-in-Picture
B2.7.3.4 Save the Current Screen Lay-out
Set-up Defaults to User
20.10.05 TW/TW
Location
B-19
B-19
B-19
B-19
B-19
B-20
B-20
B-20
B-20
B-20
B-20
B-21
B-21
B-21
B-21
B-5
B-8
B-9
B-10
B-12
B-12
B-14
B-15
Page B-2