Laserdyne RMU User Manual page 26

:
User's Manual
Black Opal Models RMU
Flat Panel Display Systems
NOTE: to set up VGA input, go first to the FREQUENCY option in the
Position menu (via the VGA menu, i.e. Main/VGA/Position/
FREQUENCY). Set this value first before any other parameter
within the VGA menu structure.
•
Selecting the VGA menu presents the menu items GAIN, OFFSET, PHASE and
POSITION, and if the VGA menu was accessed from a full screen VGA lay-out
with no PIP (i.e. accessed via the MENU button), DEFAULTS.
# Menu Item
1 Gain
2
Offset
3 Phase
4 Position
5 Defaults
•
Select the desired item and press ENTER.
•
In the case of GAIN, OFFSET or PHASE, adjust value and press ENTER.
NOTE: the VGA GAIN and OFFSET adjustments work differently to
those for video. The two are inter-related, and change
inversely to the value change (i.e. increased value yields
decreased effect).
•
Selecting POSITION presents the menu items HORIZ, VERT and FREQUENCY.
Select the desired item, adjust value and press ENTER.
NOTE: ensure that FREQUENCY is set before any other parameter in
the VGA menu structure;
some positions on the screen may result in an unstable
image - if this occurs, adjust the position slightly until the
instability ceases.
•
If defaults are offered and desired, select DEFAULTS and press ENTER.
UM-RMU-M-0288-0_1
Allows the adjustment of gain value for display
contrast.
Allows the adjustment of offset value for display
brightness (as opposed to backlight intensity).
Allows the adjustment and setting of phase value.
Accesses Position menu to allow adjustment of
horizontal and vertical on-screen position.
Accesses Defaults menu for restoration of Set-up
defaults to screen-layout(s), and allows the system to
be rebooted or set to standby.
20.10.05 TW/TW
Result
Page 6-11