Laserdyne RMU User Manual page 28

:
User's Manual
Black Opal Models RMU
Flat Panel Display Systems
6.4.6.1 For Video
•
If a Main menu is offered, select VIDEO MAIN or VIDEO PIP (in the case of full-
screen video only, the Video menu will be offered directly upon pressing MENU
button).
6.4.6.1.1 Adjust Contrast, Brightness and/or Colour Saturation
•
From the Video menu, select GAIN (to adjust display contrast), LEVEL (to adjust
display brightness, as opposed to backlight intensity), or SATURATION (to
adjust colour intensity), as required.
•
Set value(s) as required.
6.4.6.1.2 Select Colour Options for Display
•
From the Video menu, select COLOUR.
•
From the Colour menu, select TRUE (to display the true input colour) or MONO
GREY [to display 8-bit grey scale); or
•
From the Colour menu, select RAINBOW 1 for pseudo colourisation based on
spectral rainbow version 1, RAINBOW 2 for pseudo colourisation based on
spectral rainbow version 2, or IRONBOW for pseudo colourisation based on the
colour temperature spectrum of iron. The Pseudo menu will be offered.
•
If a pseudo colourisation item has been selected from the Colour menu
(RAINBOW 1, RAINBOW 2 or IRONBOW) then from the Pseudo menu, select
TRUE for unmodified pseudo colourisation, INVERT for inverted pseudo
colourisation, THRESHOLD to enable a "temperature" (grey scale) threshold
above which pseudo colourisation is applied, or ADJUST for setting the
threshold to be enabled by THRESHOLD. Select the desired item and press
ENTER.
6.4.6.2 For VGA
NOTE: ensure that FREQUENCY is set before any other parameter in
the VGA menu structure.
•
If a Main menu is offered, select VGA MAIN (in the case of full-screen VGA only,
the VGA menu will be offered directly upon pressing MENU button).
UM-RMU-M-0288-0_1 20.10.05 TW/TW Page 6-13