Laserdyne RMU User Manual page 27

:
User's Manual
Black Opal Models RMU
Flat Panel Display Systems
6.4.5.4 Defaults Menu
•
Selecting the Defaults menu presents the menu items CURRENT, REBOOT,
and STANDBY.
# Menu Item
1
Current
2 Reboot
3 Standby
•
Select the desired item and press ENTER.
6.4.6 Working with Menus - How to
In every case:
selection of a menu item is achieved by scrolling to it with the scroll/adjust (-/+)
buttons and then pressing ENTER (button 5); and
setting a value is achieved by adjusting it to the desired value using the
scroll/adjust (-/+) buttons and then pressing ENTER (button 5).
Once a selection has been made or a value has been set:
if no other items in the current menu are still relevant, the system will return to
the next highest relevant menu; or
if other items in the current menu are still relevant, the system will remain in the
current menu.
You can progress back up the menu structure by selecting BACK, or close the
menu presentation entirely by pressing EXIT (button 2).
NOTE: pressing EXIT will abandon any in-progress adjustments (i.e.
adjustments that have not yet been set by pressing ENTER).
UM-RMU-M-0288-0_1
Defaults menu
Current
Reboot
Standby
Figure 6-7: Defaults Menu Structure
Restores Set-up values to the User parameters for
the current screen lay-out.
Reboots the system.
Sets the system to standby.
20.10.05 TW/TW
Result
Page 6-12