B2.2 Main Menu; B2.3 Video Menu - Laserdyne RMU User Manual

:
User's Manual
Black Opal Models RMU
Flat Panel Display Systems

B2.2 Main Menu

•
Pressing MENU accesses the Main menu which presents the menu items
VIDEOMAIN, VIDEOPIP, VGA, OUTPUT and DEFAULTS. Either of the first two
will enter the Video menu, but selections and adjustments will only apply to the
selected camera/video source, i.e. the display settings for each video source
may be set independently. Selecting VGA enters the VGA menu. Selecting
OUTPUT enters the Output menu. Selecting DEFAULTS restores all parameters
to their factory-set default settings for either the current or for all screen lay-outs.
# Menu Item
1
Videomain
2
VideoPIP
3
VGA
4
Output
5
Defaults
•
Select the desired item and press ENTER.

B2.3 Video Menu

•
Selecting VIDEOMAIN or VIDEOPIP from the Main menu accesses the Video
menu which presents the menu items INPUT, CORRECTION and ADJUST.
# Menu Item
1 Input
2 Correction
3 Adjust
•
Select the desired item and press ENTER.
UM-RMU-M-0288-0_1
Accesses Video menu to allow adjustment of display
characteristics for the video channel for full screen in
the current lay-out.
Accesses Video menu to allow adjustment of display
characteristics for the video channel(s) as Picture(s)-
in-Picture in current lay-out.
Accesses VGA menu to allow adjustment of display
characteristics for VGA channel in current lay-out.
Accesses Output menu to create screen lay-outs and
to reboot or go to standby.
Accesses Defaults menu to restore all parameters to
the original factory-set default settings for the current
or for all screen lay-outs.
Accesses Input menu to set input parameters, (e.g.
connection & signal formats) for the image source.
Accesses Correction menu to adjust parameters
such as hue and position.
Accesses Adjust menu to adjust parameters such as
gain, level and colour saturation.
20.10.05 TW/TW
Result
Result
Page B-7