Laserdyne RMU User Manual page 2

:
User's Manual
Black Opal Models RMU
Flat Panel Display Systems
User's Manual
READ THIS DOCUMENT THOROUGHLY BEFORE
ATTEMPTING TO ASSEMBLE OR OPERATE
Multi Function Flat Panel Display Systems
Treatment of this product other than as specified herein may result in:
damage to the product or attached systems;
invalidation of the warranty.
The location of this document should always be known to all users of, and technical
support personnel for, the Black Opal RMU.
The information contained herein is proprietary to Laserdyne Pty Ltd. No part of this work may
be reproduced or copied in any way without prior written permission of Laserdyne Pty Ltd.
Note: specifications herein are subject to change without notice.
CAUTIONS:
•
On receipt of your Black Opal RMU, immediately report any damage to
packaging or contents to your supplier.
•
Ensure that all instructions in the separate Specifications and Set-up
document applicable to your model are performed correctly, before
attempting to operate the Black Opal RMU.
•
The system is in standby status whenever external power is applied. Do
not leave the system in standby status for extended periods (remove
external power).
•
Resetting the system should not be performed gratuitously, as the
system may not have updated its EEPROM settings since the last setting
change.
•
Avoid scratching, abrading or contaminating the surface of the display
window; do not scrub.
UM-RMU-M-0288-0_1
THE
Black Opal
Models RMU
20.10.05 TW/TW i