1. Manuals
  2. Brands
  3. Edgewater Networks Manuals
  4. Gateway
  5. EdgeMarc 250W
  6. Quick start manual

Edgewater Networks EdgeMarc 250W Quick Start Manual

Network services gateway
Hide thumbs Also See for EdgeMarc 250W:
1
2
3
4
5
6
7

Advertisement

Table of Contents

EdgeMarc 250W

Network Services

Gateway
Quick Start Guide
Version 1.0
Page 1 of 7
200-250EW-001

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EdgeMarc 250W and is the answer not in the manual?

Questions and answers

Related Manuals for Edgewater Networks EdgeMarc 250W

Summary of Contents for Edgewater Networks EdgeMarc 250W

  • Page 1: Network Services

    EdgeMarc 250W Network Services Gateway Quick Start Guide Version 1.0 Page 1 of 7 200-250EW-001...

  • Page 2: Before You Start

    Before You Start Please read this guide thoroughly as it describes the basic installation of the device. Refer to online help for assistance when deploying and configuring the device in a specific environment. This guide also provides an example of a typical 250W deployment that can be used as a guideline for your installation.

  • Page 3: Step 1 − Connecting The Cables

    Instructions Step 1 − Connecting the Cables 1. If you are using an ADSL connection, connect one end of the phone cable to the ADSL port (denoted by “A” in the above diagram) and the other end of the cable to the phone jack on the wall.
  • Page 4 Make sure that the power LED is solid green on the front of the device as denoted by “A” in the following picture. Make sure that the Ethernet LAN LED on the front of the device is solid green or amber for the port to which the device is connected, as denoted by “B” the following picture.
  • Page 5 3. Enter “root” in the User name field and “default” in the Password field. 4. The System page should appear next. If you should see the "message of the day" instead, just click on the System link under “Configuration Menu” to get to the System page.

  • Page 6: Step 3 − Plan Your Configuration

    Step 3 − Plan Your Configuration The EdgeMarc 250W can be deployed as a gateway router in a network. It can also be deployed in a network behind an existing firewall. Note: When deploying VoIP services, all connected LAN switches or routers must support full duplex.
  • Page 7 The web page configurations for the various 250W deployments are shown below. The two darker- shaded rows indicate the minimum configuration required for each deployment. 250W GUI 250W as 250W within existing 250W behind an Configuration Gateway infrastructure existing firewall Page Router Network...

Table of Contents