Related Manuals for Edgewater Networks EdgeMarc 4552
Summary of Contents for Edgewater Networks EdgeMarc 4552
- Page 1 EdgeMarc 4552 Networking Gateway Quick Start Guide Version 1.0 Page 1 of 7 EWN00B-01-A001...
-
Page 2: Before You Start
Before You Start Please read this guide thoroughly as it describes the basic installation of the device. Additional configuration needed to deploy the device in a specific environment can be performed with the help of online help. This guide also provides an example of a typical 4552 deployment that can be used as a guideline for your installation. -
Page 3: Step 1 Connecting The Cables
Instructions Step 1 Connecting the Cables 1. Connect one end of an Ethernet cable to local LAN port 1 of the 4552. This port can be seen in the area “B” of the above picture. Connect the other end of the cable to your computer’s Ethernet port. - Page 4 Page 4 of 7...
- Page 5 Step 2 Configuring the EdgeMarc 1. Launch a web browser on the PC and enter the following URL: http://192.168.1.1 and hit enter. 2. The following login window should appear: 3. Enter “root” in the “User name” field and “default” in the “Password” field. 4.
-
Page 6: Step 3 Plan Your Configuration
Step 3 Plan Your Configuration The EdgeMarc 4552 can be deployed as a gateway router in a network. It can also be deployed in a network behind an existing firewall. Note: When deploying VoIP services, all connected LAN switches or routers must support full duplex. - Page 7 Edgewater Technical Assistance Center at 408.351.7255 for additional information or assistance. Edgewater Networks, Inc. 2895 Northwestern Parkway Santa Clara, CA 95051 Phone: (408) 351-7200 info@edgewaternetworks.com Converged Networking. Simplified. All rights reserved. Copyright© 2010, Edgewater Networks, Inc. Page 7 of 7...
Need help?
Do you have a question about the EdgeMarc 4552 and is the answer not in the manual?
Questions and answers