PRECAUTIONS
RWARNING! NEVER
outlet. Ths may pose a fire hazard or result n an electrc shock.
RWARNING! NEVER
power source of more than 16 V DC such as a 24 V battery.
Ths connecton wll run the transcever.
RWARNING! NEVER
tween the DC plug and fuse holder. If an ncorrect connecton
s made after cuttng, the transcever mght be damaged.
RWARNING! NEVER
normal operaton of the vehcle may be hndered or where t
could cause bodly njury.
CAUTION! NEVER
allow chldren to touch the trans-
cever.
CAUTION! NEVER
expose the transcever to ran,
snow or any lquds.
USE
the specfied mcrophone only. Other mcrophones have
dfferent pn assgnments and may damage the transcever.
DO NOT
use or place the transcever n areas wth tem-
peratures below –30°C (–22°F) or above +60°C (+140°F), or
n areas subject to drect sunlght, such as the dashboard.
connect the transcever to an AC
connect the transcever to a
cut the DC power cable be-
place the transcever where
DO NOT
operate the transcever wthout runnng the ve-
hcle's engne. The vehcle's battery wll quckly run out when
the transcever transmts whle the vehcle's engne s OFF.
DO NOT
place the transcever n excessvely dusty env-
ronments.
DO NOT
place the transcever aganst walls. Otherwse
heat dsspaton wll be obstructed.
DO NOT
use chemcal agents such as benzne or alcohol
when cleanng, as they damage the transcever surfaces.
BE CAREFUL!
The transcever wll become hot when
operatng contnuously for long perods.
For U.S.A. only
CAUTION! Changes or modficatons to ths transcever, not
expressly approved by Icom Inc., could vod your authorty to
operate ths transcever under FCC regulatons.
Approved Icom optonal equpment s desgned for optmal
performance when used wth an Icom transcever.
Icom s not responsble for the destructon or damage to an
Icom transcever n the event the Icom transcever s used
wth equpment that s not manufactured or approved by
Icom.
Need help?
Do you have a question about the iF5061/D and is the answer not in the manual?
Questions and answers