Elbow Fitting Dimensions; Reflector End Cap - Roberts Gorden Vantage HE-40 Installation, Operation & Service Manual

-
R O B E R T S G O R D O N
ELBOW INSTALLATION
90° Elbow
Figure 11. 90° Elbow Fitting Dimensions
Install Reflector End Caps as shown in Figure 13.
Reflector
Elbow
Figure 12. Elbow Installation
Reflector
Figure 13. Reflector End Cap Installation
15-1/4"
(38.7 cm)
9" (23 cm) radius
6-1/4"
(16 cm)
Reflector End
Cap
Reflector End
Cap
(4) U-Clips
7 :
S E C T I O N C O M P O N E N T I N S TA L L AT I O N
ELBOW FITTING
VANTAGE ® HE heaters may be installed using an
° Elbow fitting (P/N 01335801) along with
optional 90
one additional Stainless Steel End Cap (P/N
027508SH) and one additional Stainless Steel Coupling
Assembly (01312700).
Reflector
REFLECTOR END CAP INSTALLATION
Reflector end caps must be installed over the open ends
of reflectors. Attach the end cap to the reflector using a
minimum of four U-clips per end cap (see Figure 13).
pg 17