Table of Contents
Advertisement
Chapter 3: Using the Hardware
2. Tap and hold the file you
want to copy to your Field
PC. A pop-up menu
appears, as shown here.
Note: If you want to copy
multiple files, tap and drag
the stylus over the files.
Once the files are selected,
tap and hold the stylus on
the files until a pop-up
menu appears.
3. Select Copy.
4. Open the destination folder
where you want to place
your copied file.
5. Tap and hold the stylus on
the white space below the
existing files until the pop-
up menu appears again.
6. Select Paste. The file is
copied and its name
appears on the screen.
Reattaching the standard cap.
To reattach the standard cap,
follow these steps:
1. Make sure the hand strap is attached to its top latch.
2. Place the standard cap over the case.
3. Use a screwdriver to turn the standard cap screws
until they are firmly in place.
! !
CAUTION: Do not overtighten the screws. Tightening
the screws over 12-in-lb (1.36 N-m) could result in a
failure. The torque specs for the standard cap are
2-in-lb (0.23 N-m).
27
Advertisement
Table of Contents
