Table of Contents
Advertisement
This section tells you how to insert your card(s)
properly. For memory cards, see step 3. For medium
or large CF cards, see step 4. For any other card
types, insert your card(s) and skip to step 5.
CAUTION: Before inserting a card, make sure the
four side screws on the seal adapter plate are backed
out
/
inch as shown in the first image in step 2.
1
8
3. If you are inserting an SD or CF memory card, make
it easier to remove by first placing a card pull tab
onto the card. Insert the card.
4. A Type I CF card is thinner than a Type II card,
so it needs a spacer to keep the card in place.
Before you insert a Type I CF card (
3 mm thick), first insert the card spacer in
the CF card slot closest to the front of the
Field PC. If you are inserting a Type II
CF card (¼ inch or 5.5 mm thick), do
not insert the spacer card. Insert
the card.
Type I CF card spacer
/
inch or
1
8
7
Advertisement
Table of Contents
