Snubber Board (58) Code 5.602.166; Programming Board (21) Code 5.602.174 - Cebora SOUND MIG 2035/M Pulse Service Manual

CEBORA S.p.A.
5.10

- Snubber board (58) code 5.602.166.

5.10.1 - Topographical drawing.
5.10.2 - Connector table.
Conn. Terminals
J1 1 - 2
J3 1 - 2
J4 1 - 2
- TP1 - TP5
- TP6 - TP10
- TP2 - TP7
5.11

- Programming board (21) code 5.602.174.

5.11.1 - Topographical drawing.
5.11.2 - Connector table.
Conn. Terminals
J1 2
J1 3
J1 5
J1 4 - 6
J1 7 - 8
J2 1(+) - 9(-)
J2 3
J2 5
J2 7
J2 8
J2 10
U1 -
U2 -
3.302.161
Function.
wire coil cover open signal input.
wire coil cover open or diode group (56) overtemperature signals output.
diode group (56) overtemperature signal input.
transformer (30) secondary circuit end terminal input.
transformer (30) secondary circuit end terminal input.
diode group (56) cathode terminals output.
Function.
Tx signal of serial communication line to outside (programming system).
Rx signal of serial communication line to outside (programming system).
GND for serial communication line signals (programming system).
DTR/DSR signal of serial communication line to outside (programming system).
RTS/CTS signal of serial communication line to outside (programming system)
+5 Vdc input for programming board (21) and serial communication line to outside power
supply.
Tx signal for serial communication line.
Rx signal for serial communication line.
SDA signal for programming board (21).
SCL signal for programming board (21).
WP signal for programming board (21).
connector for custom programs EEPROM.
connector for custom programs EEPROM.
41
24/03/2004