Configuring Via Keypad - Well SIP-T26P User Manual

Enterprise IP Phone
Password
SIP Server
When you have finished the Network and Account Setting configuration, the Register
Status Icons will show in the idle screen:
Register successfully
Register failed
Registering
When all accounts register fail, phone will display "No Service" by default.
When the phone reboot, it will register automatically. If many phones register at the
same time, this will affect the server, the users can set the register power up time so
that the phone will random register automatically within the set time.
Setting the power up time via web interface:
Click on Network->Advanced-> Registration random, enter the time in the field.
Note:
Should the IP PBX (SIP registrar) require an authentication, you will be prompted to
enter the correct password. Make sure you are using the appropriate input method
or enter the password via the web interface.

Configuring via keypad

Network Settings: Press Menu->Settings->Advanced Settings, enter the
password, and select Network ->WAN Port /PC Port /VLAN/Webserver
Type/802.1x Settings/VPN Option to enter the internet relating configuration
page.
Account Settings: Press Menu->Settings->Advanced Settings, enter the
password, and select Accounts to configure the account settings.
You can refer to the above "Configuring via Web Page" for the parameter detail.
6
Account password provided by ITSP.
SIP server address provided by ITSP.
Getting Started