Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Manual
Advertisement
Table of Contents
Related Manuals for Well 3130IF
Summary of Contents for Well 3130IF
- Page 1 3130IF -VoIP User Manual V2.0 IP Phone User Manual This Manual provides basic information on how to install and connect 3130IF IP Phone to the network. It also includes features and functions of 3130IF IP phone components, and how to use them.
-
Page 2: Table Of Contents
3130IF -VoIP User Manual V2.0 Contents 1 BEFORE GETTING STARTED ..............5 2 CHECK LIST ....................5 3 FEATURES AND SPEC ................5 4 INSTALLATION.................... 9 5 PRODUCT OVERVIEW................9 6 BASIC OPERATIONS .................10 6.1 M ...................10 HONE ALLS 6.2 OGM ICM..................11... - Page 3 3130IF -VoIP User Manual V2.0 Wide area network（WAN） ................22 Local area network (LAN) ................25 7.2.4 VOIP configuration ................26 H.323 configuration ..................26 SIP configuration ..................30 7.2.5 Advance configuration ................34 Net Service configuration ................34 Value added service configuration..............39 DSP configuration ..................42 Configuration Explanation:................43 Number binding configuration ..............43...
- Page 4 3130IF -VoIP User Manual V2.0 7.3 C ................59 ONFIGURATION VIA ELNET 7.3.1 Basic Command...................60 7.3.2 Command structure................60 7.3.3 S .............62 TRUCTURE OF ONFIG TERMINAL...
-
Page 5: Before Getting Started
3130IF -VoIP User Manual V2.0 1 Before Getting Started Before you can connect 3130IF to the network and use it, you must have a high-speed Internet connection installed. A high-speed connection includes such environments as DSL, cable modem, and a leased line. 3130IF IP phone is a stand-alone device, which requires no PC to make Internet calls. - Page 6 3130IF -VoIP User Manual V2.0 -Fast start with early media channel -Peer to Peer H323 call SIP RFC3261, RFC3262, RFC3666, RFC2543 -IP (RFC0791), TCP (RFC0793), UDP (RFC0768), ARP (RFC0826) -ICMP, ARP, RARP, SNTP -SDP TFTP HTTP DNS -SIP server: 2 IP account with password protection...
- Page 7 3130IF -VoIP User Manual V2.0 -ToS Diffserv, 802.1p/q -VAD, CNG, Packet Loss Compensation, adaptive Jitter Buffer; Echo cancellation G.168 Dial Tone Signal Generation DTMF (out of Band RFC 2833 / in band) SIP Info interoperate with CISCO SIP device Phone features...
- Page 8 3130IF -VoIP User Manual V2.0 Headset (option) Max. 4 minutes recoding for OGM, ICM (with Recording / Finish Gain control) Hotline number Configuration Support -Keypad & LCD, Web, Telnet, TFTP -Password protection for configuration Firmware Upgrade -TFTP; HTTP; FTP, Telnet,...
-
Page 9: Installation
Remove the LAN cable for Internet connection from your PC and connect it to ‘WAN’ port of 3130IF Connect the power adapter in the box to ‘Power’ Find LAN cable in the box and connect between ‘Lan’ port and your PC (PC is not required for set up or making a call.) -
Page 10: Basic Operations
3130IF -VoIP User Manual V2.0 Key Button Key Button Definitions Digit, star and pound keys are also used for setting and call 0 - 9, *, # process. Digit / Space key Display local IP address on LCD / enter key... -
Page 11: Ogm And Icm
3130IF -VoIP User Manual V2.0 4. When the unit indicates Missed calls, press 【Call List】 and 【Down】 button to enter Miss call menu, then press【 Local IP/OK】 button to review number. Press【#】 button to dial out this number. 5. In ideal mode, enter the desired number to make pre-dial, Press 【#】 button to dial out this number, and press 【Hold/Del】delete and modify the number. -
Page 12: Icm Check
3130IF -VoIP User Manual V2.0 Press 【Local IP/OK】 key and LCD show: Press OK to Rec Press 【Local IP/OK】 key again to begin record and press 【Rec/Finish】 to quite recording. And press【DOWN】 or 【UP】 key and LCD show: --- User-Defined --- Play Press 【Local IP/OK】... -
Page 13: Phone Book Number Store / Edit / Delete
3130IF -VoIP User Manual V2.0 --- Record 1--- Play Press【Local IP/OK】 key and LCD SHOW: Press OK To Play Press【Local IP/OK】 key again to playback. 6.3 Phone book number store / edit / delete In standby, -press 【PH Book】 button, LCD display “Phone Book Current”... -
Page 14: Hold
3130IF -VoIP User Manual V2.0 - press 【UP】 till LCD display ”Received”, then press 【OK】 to check latest received call, press 【UP】 and 【DOWN】 to review other and press 【#】 to dial out; press 【Hold/Del】 to delete. - press 【UP】 till LCD display ” ”Call Record Dialed”, then press 【OK】to check latest miss call, press 【UP】... -
Page 15: Unit Configuration
3130IF -VoIP User Manual V2.0 7. Unit Configuration 7.1 Configuration with keypad and LCD display In standby, press and hold 【#】 button till LCD shows " Input Password: " input correct password (default is 123), press 【OK】 key to enter the menu list. - Page 16 3130IF -VoIP User Manual V2.0...
- Page 17 3130IF -VoIP User Manual V2.0...
- Page 18 3130IF -VoIP User Manual V2.0...
- Page 19 3130IF -VoIP User Manual V2.0...
-
Page 20: Configuration Via Web
3130IF -VoIP User Manual V2.0 7.2 Configuration via WEB The IP Phone Web Configuration Menu can be accessed by the following URI: http://Phone-IP-Address:9999. The default LAN IP address is “192.168.123.1” and WAN IP address is “192.168.1.179”. If the web login port of the phone is configured as non-80 standard port, then user need to input http://xxx.xxx.xxx.xxx, otherwise the web will show that no... -
Page 21: Current State
3130IF -VoIP User Manual V2.0 -Guest account: the default username and password is "guest", user can have a browse of system. -Administrator account: the default username and password is "admin", this user can configure the system. Note: After inputting username and password, user press carriage return directly to enter the page. -
Page 22: Network Configuration
3130IF -VoIP User Manual V2.0 parameter, including Gate Keeper IP of H323,H323ID,whether enables register, whether has registered on GK; Register server IP of SIP, proxy server IP, whether enables register, whether has registered on register server, whether enables outbound proxy, whether enables STUN server. - Page 23 3130IF -VoIP User Manual V2.0 service, then the IP address will be gained by the set PPPOE ISP internet and password of the account. Note: If IP address has been modified, the web page will no longer respond owing to the modification, so new IP address should be input in the address field now.
- Page 24 3130IF -VoIP User Manual V2.0 Configure static IP address; Configure subnet mask; Configure IP address of the phone; Configure "DNS domain" suffix; if user input "domain" and it can't be resolved, then the phone will add and resolve the "domain" after user has input;...
-
Page 25: Local Area Network (Lan)
3130IF -VoIP User Manual V2.0 Service name, if PPPoE ISP has no special requirement for this name, generally is the default; PPPoE account; PPPoE password; Configure the parameter and then click "apply" to go into effect. Local area network (LAN) -
Page 26: Voip Configuration
3130IF -VoIP User Manual V2.0 Configure LAN static IP; Configure LAN subnet mask; Enable LAN port DHCP server; after user modify LAN IP, the phone will automatically modify the adjustment and save the configuration according to IP and subnet mask team DHCP Lease Table, user need to restart the phone to make DHCP server configuration go into effect;... - Page 27 3130IF -VoIP User Manual V2.0 Configuration Explanation: show H323 register state; if register successfully, there will show Registered in the square bracket, otherwise show Unregistered; Configure default GateKeeper IP address; Configure default GK port; Configure default GK ID; if no special requirement of GK, user don't need to fill...
- Page 28 3130IF -VoIP User Manual V2.0 in anything; The system initiates Q931 signal port, the default is 1720; Configure the net gate RAS register port for the system; terminal user can logon to gatekeeper through RAS passage and make a request for allowing to initiate the call request.
- Page 29 3130IF -VoIP User Manual V2.0 Configure enable/cancel register; Configuration for transferring 245 message package to 225 message package; Configure H323 to run the talking only by G.7231 encode, the default is Disable; Configure the phone use H323 protocol as default call protocol;...
-
Page 30: Sip Configuration
3130IF -VoIP User Manual V2.0 Configure GK backup server IP; Configure server port for GK backup; Configure ID for GK backup; GK detection interval time configuration, the unit is second; Enable the phone's auto-swap to GK; Configure the phone to detect GK automatically. - Page 31 3130IF -VoIP User Manual V2.0 Configuration Explanation: show SIP register state; if register successfully, there will show Registered in the square bracket, otherwise show Unregistered; Configure SIP register server IP address; Configure SIP register server signal port; Configure SIP register account（usually it is the same with the port number that...
- Page 32 3130IF -VoIP User Manual V2.0 Configure password of SIP register account; Configure proxy server IP address（usually SIP will provide user with service of proxy server and register server which have the same configuration, so the configuration of proxy server is usually the same with that of register server, but if the configurations of them are different(such as different IP addresses), then each server's configuration should be modified separately）;...
- Page 33 3130IF -VoIP User Manual V2.0 Configure expire time of SIP server register, the default is 600 seconds. If the expire time that server requires is more or less than that configured by the phone, the phone can automatically modify it to the recommended time limit and register;...
-
Page 34: Advance Configuration
3130IF -VoIP User Manual V2.0 Note: If you want to register and call through server, you must configure （ ） corresponding numbers which are usually SIP accounts to local port, Otherwise the phone will reject for sending out register message when it considers that there is no number. - Page 35 3130IF -VoIP User Manual V2.0 Leased IP-MAC correspondence table of DHCP; The configuration on this page needs to be saved after modified and will go ※ into effect after restarting. If the Telnet, HTTP port will be modified, the port is better to be set as greater ※...
- Page 36 3130IF -VoIP User Manual V2.0 Configure explanation of private server; To show the phone whether has been registered on public server or private server; Configure IP address of SIP STUN server; Configure port of SIP STUN. STUN can support SIP terminal's penetration to NAT in the inner-net. In this way, as long as there is conventional SIP proxy and a STUN server placed in the public net, it will do;...
- Page 37 3130IF -VoIP User Manual V2.0 Public backup server configuration; the specific configuration parameter has the same meaning with public server. It should be noted that the username and password should be the same with the public main server; Configure to enable public outbound proxy. If proxy server has been enabled, the phone will consider the user as using outbound proxy automatically.
- Page 38 3130IF -VoIP User Manual V2.0 REGISTRATION REPEATEDLY. SERVER MAY STOP RESPONSE OF DIALOGUE MACHINE, THEN THE PHONE RECEIVES NO CERTIFICATION OF REGISTER/CANCEL LOGIN REQUEST AND REGISTRATION STATE WILL SHOW AS INCORRECT! Private server configuration. specific configuration parameter has the same meaning with public server;...
-
Page 39: Value Added Service Configuration
3130IF -VoIP User Manual V2.0 Configure display of account & password list; Click Add to add account and password, it is shown as the following figure: Configure additive accounts Configure additive passwords Click submit to submit the configuration, click return to cancel the configuration and return;... - Page 40 3130IF -VoIP User Manual V2.0 Configuration Explanation: Configure hot-line number of the port. With this number of the port, this hot-line number will be dialed automatically as soon as off-hook and user can's dial any other number; Call forwarding. The default is Disable; when busy is selected, if the number dialed is engaged after the phone has received a call, then it will automatically transfer to the configured number according to the following configuration;...
- Page 41 3130IF -VoIP User Manual V2.0 number IP configuration of call transfer (CT); Configure enable/disable call waiting service; after it is enabled, user can hold calls of the other party by hooking, with hooking again, the hold call can go on;...
-
Page 42: Dsp Configuration
3130IF -VoIP User Manual V2.0 Configure enable/disable Enable Rec/Finish Record, then no body answer the call, the phone will into the answering function; Configure enable/disable User-Defined Rec/Finish, then enable Rec/Finish record, the phone will auto request user leave message. After the aforesaid configuration has been done, click apply to make them go into effect. -
Page 43: Configuration Explanation
3130IF -VoIP User Manual V2.0 Configuration Explanation: Configure output volume; Configure input volume; Configure handsfree volume; Configure handdown time, that is, if the hooking time is shorter than this time, then the gateway will not consider the user has handdown. -
Page 44: Configuration Explanation
3130IF -VoIP User Manual V2.0 make direct call to the party by point-to-point mode: the other party's number is 1234,make a configuration of 1234 directly ,then the phone will send the called number1234 to the corresponding IP address; Or set numbers with prefix matching pattern, for example, user want to make a call to a number in a certain region（010）,user can configure the corresponding number IP as... - Page 45 3130IF -VoIP User Manual V2.0 which; It is to add outgoing call number, there are two kinds of outgoing call number setup: One is exactitude matching, after this configuration has been done, when the number is totally the same with the user's calling number, the phone will make the call with this number's IP address image or configuration;...
- Page 46 3130IF -VoIP User Manual V2.0 default of sip protocol is 5060;lifeline required no configuration of this item, shown as 0; Configure alias, this is optional configuration item: it is the number to be used when the other party's number has prefix; when no configuration has been made, shown as no alias;...
- Page 47 3130IF -VoIP User Manual V2.0 the replacing length. For example, user want to dial PSTN（010－62281493） by VoIP's Rec/Finish over service, while actually the called number should be 8610 － 62281493,then we can configure called number as 010T,then rep:8610,and then set the replacing length as 3. So that when user make a call with 010 prefix, the number will be replaced as 8610 plus the number and then sent out.
- Page 48 3130IF -VoIP User Manual V2.0 To modify alias; this is optional configuration item; To modify suffix; this is optional configuration item; To modify replacing length（if rep and del of alias have been configured）; Click submit to go into effect; click return to cancel configuration and return.
-
Page 49: Save And Clear Configuration
3130IF -VoIP User Manual V2.0 Image of 8T means when user configure private server and register, then user just need to add a"8"before the calling number whenever making a call by private SIP; Image of 7T means when user configure h323 server and register, then user just need to add a"7"before the calling number whenever making a call by... -
Page 50: Ftp Download
3130IF -VoIP User Manual V2.0 has been completed, restart the phone and it will be usable at once. FTP download On this page, user can upgrade system and configure files by FTP or TFTP mode. -
Page 51: Configuration Explanation
3130IF -VoIP User Manual V2.0 Configuration Explanation: Configure upload or download FTP/ TFTP server IP address; Configure username of the upload or download FTP server. If user select TFTP mode, username and password are not required to be configured; Configure upload or download of FTP server password;... -
Page 52: Configure File Encryption
3130IF -VoIP User Manual V2.0 Click config download button, the phone will download configuration files of FTP/TFTP server to the phone and the configuration will go into effect after restarting; Output configure file can be edit, delete, or make comment starting by # on each command. - Page 53 3130IF -VoIP User Manual V2.0 Configure unit as follow steps: Input IP add. of desired FTP server. Input user name of desired FTP server. Input user password of desired FTP server. Input name configuration file. Software version must be different for each...
-
Page 54: Configuration Files Web Download
3130IF -VoIP User Manual V2.0 If configuration file is encrypted, password needed. Chose server type as either FTP or TFTP. Set auto-upgrade interval duration. Chose auto-upgrade type. Configuration files WEB download On this page, user can directly select the configuration files on the hard disk of the computer, and then make modification to the system configuration, after the download, restart the phone and the configuration will go into effect. -
Page 55: Configuration Explanation
3130IF -VoIP User Manual V2.0 Configuration Explanation: display of phone user account list; To add phone account; it will be shown at lower part of page as the following figure, of which: Add new accounts; account level; root possesses authorities to modify configuration, general possesses read-only authority;... - Page 56 3130IF -VoIP User Manual V2.0 Select users that you want to delete in the drop-down menu, click Delete. To modify the chosen accounts, need to select account first, click load again and then click modify, it will be shown at lower part of page as the following figure, of which: The modified username;...
-
Page 57: Phone Book Configuration
3130IF -VoIP User Manual V2.0 Phone book configuration On this page, user can save and configure telephone book. VPN configuration On this page, user can save and configure VPN setting. Configure VPN server address;... -
Page 58: Time Zone Configure
3130IF -VoIP User Manual V2.0 Configure VPN server port; Configure VPN server group ID; Configure VPN server area code; Configure enable/disable VPN tunnel; Configure out GK address. Time zone configure On this page, user can save and configure time zone setting. -
Page 59: Configuration Via Telnet
3130IF -VoIP User Manual V2.0 Configure the desired time zone. 7.3 Configuration via Telnet In DOS window, input telnet 192.168.10.23, enter:... -
Page 60: Basic Command
3130IF -VoIP User Manual V2.0 Then input USER NAME：admin PASWORD：admin 7.3.1 Basic Command input “help” or “？”under terminal to check all sub-terminal and globe command; input “help” or “？”under command to check parameters; input “！” or“exit”to quit former path. 。... - Page 61 3130IF -VoIP User Manual V2.0 ---account ---config ---debug ---download ---password ---setdefault ---show ---telnet ---time ---trancert ---update ---upload Most command parameters are under terminal “config”, which structures as follows: WinLine<config># ---accesslist ---dhcpserver ---dial-rule ---h323 ---interface ---mmifilter ---nat ---netservice ---pbook ---port ---pppoe...
-
Page 62: Structure Of Config Terminal
3130IF -VoIP User Manual V2.0 --qos ---sip ---udptunnel ---user 7.3.3 Structure of Config terminal Access list firewall configuration Path：WinLine<config-accesslist># Add protocol ---entry –I/O xxx –P/D xxx –sraddr x.x.x.x –srcmask x.x.x..x–desaccr x.x.x.x –desmask x.x.x.x –portrange xxx–portnum xxx Ex.：WinLine<config-accesslist>#entry – I/O input – P/D deny – proto udp –... - Page 63 3130IF -VoIP User Manual V2.0 ex：WinLine<config-dhcp>#no entry – name lan2004 ---show Review DHCP protocol Cancel / enable DNS–relay ---[no]dns–relay Dial–Rule configuration Path：WinLine<config–dialrule># Cancel / enable # means dial finish ---[no]endchar Setting fix length dialing ---fixlen xxx Cancel fix length dialing...
- Page 64 3130IF -VoIP User Manual V2.0 Cancel / enable Call ajf ---[no]callajf Cancel / enable H245 Tunneling ---[no]h245tunnelling Cancel / enable Multiplexing ---[no]multiplexing Cancel / enable gate keeper swap ---[no]swap–gk Interval time configuration ---interval–time xxx DTMF mode configuration ---dtmf–relay xxx Alter-gate keeper IP and port configuration ---alter–gatekeeper –ip...
- Page 65 3130IF -VoIP User Manual V2.0 Ex: WinLine<config–interface–fastethernet–lan>#ip –addr 192.168.1.10 –mask 255.255.255.0 Interface–Fastethernet–Wan configuration Path：WinLine<config–interface–fastethernet–wan># Cancel / enable dhcp service ---[no]dhcp Cancel / enable PPPoE ---[no]pppoe Cancel / enable QoS ---[no]qos Configure Gateway IP ---gateway x.x.x.x Clear gateway IP ---no gateway Configure IP ---ip –address x.x.x.x –mask x.x.x.x...
- Page 66 3130IF -VoIP User Manual V2.0 Path：WinLine<config-nat># Cancel / enable ftp alg ---[no]ftpalg Cancel / enable ipsec alg ---[no]ipsecalg Cancel / enable pptp alg ---[no]pptpalg Add TCP tcp-entry–ip x.x.x.x–lanport xxx–wanport xxx Ex：WinLine<config-nat>#tcp-entry –ip 192.168.1.5 –lanport 1720 –wanport 1000 Del TCP ---no entry –ip x.x.x.x –lanport xxx –wanport xxx Ex：...
- Page 67 3130IF -VoIP User Manual V2.0 Configure media start port and port qty. ---media-port–startport xxx –number xxxx Ex: WinLine<config–netservice>#media-port –startport 10000 number 200 Add router protocol ---route –gateway x.x.x.x –addr x.x.x.x –mask x.x.x.x WinLine<config-netservice>#route –gateway 202.112.10.1 –addr 202.112.210.1 –mask 255.255.255.0 Del router protocol ---no route –gateway x.x.x.x –addr x.x.x.x –mask...
- Page 68 3130IF -VoIP User Manual V2.0 protocol sip_all 123( user dial 100 and exact number is 123) Add number IP bonding and deletef front X number ---entry –number xxx –ip x.x.x.x –protocol xxx_del xxx Ex: WinLine<config–pbook>#entry – number 1234 – ip 202.112.20.100 –...
- Page 69 3130IF -VoIP User Manual V2.0 202.112.10.100-ip–port 5060 –protocol sip Cancel Call forwarding ---no callforward Cancel / enable call transfer ---[no]calltransfer Cancel / enable call waiting ---[no]callwaiting DSP prior codec mode ---codec xxx Port DTMFgain ---dtmfvolume xxx Setting speed dial number while being called party（FXO） ---fastcalled xxx Cancel speed dial number while being called party（FXO）...
- Page 70 3130IF -VoIP User Manual V2.0 Set port checking of same number check from high to low ---no pollup PPPoE Path: WinLine<config–pppoe># User name and password ---auth –user xxx –password xxx Ex: WinLine<config-pppoe>#auth –user aaa –password 123456 Cancel / enable ---[no]service xxx...
- Page 71 3130IF -VoIP User Manual V2.0 –password xxx SIP protocol port ---signalport xxx Server Proxy ---server proxy –ip x.x.x.x _port xxx _user xxx_password xxx WinLine<config-sip-server>#proxy 210.25.23.22_port 5060_user aaa_password 123456 Server register ---server register –ip x.x.x.x_port xxx –user xxx_password xxx Alter-server proxy ---alter-server proxy –ip x.x.x.x _port xxx _user xxx...
- Page 72 3130IF -VoIP User Manual V2.0 Check UDP tunnel protocol ---show USER management Path: WinLine<config–user># Change user ---access –user xxx –access xxx Ex: WinLine<config–user>#access – user aaa – access 7 Change user password ---password–user xxx Add user ---entry–user xxx–access xxx Ex: WinLine<config–user>#entry – user abc –...
- Page 73 3130IF -VoIP User Manual V2.0 30 –second 0 Cancel/ enable time update via server ---sntp[no]start Server add. ---sntp server x.x.x.x timeout ---sntp timeout xxx time zone ---sntp zone xxx check SNTP ---sntp show check present time ---print Update Path: WinLine# Via FTP ---update ftp –user xxx –password –ip x.x.x.x –file x.x.x...
- Page 74 3130IF -VoIP User Manual V2.0 Setting H.323 module debug message level ---debug h323 xxx Setting TEL module debug message level ---debug tel xxx Setting DSP module debug message level ---debug dsp xxx Remove module debug message level ---debug no all...
- Page 75 3130IF -VoIP User Manual V2.0 Sending message to user ---sending Check present login user ---who trace ---trancert x.x.x.x add alias ---alias xxx xxx run command ---exec xxx echo typed ---echo xxx...