Table of Contents
Advertisement
Enterprise IP Phone
Password
SIP Server
When all accounts register fail, phone will display "No Service" by default.
When the phone reboot, it will register automatically. If many phones register at the
same time, this will affect the server, the users can configure the register power up
time so that the phone will random register automatically within the configured time.
To configure the power up time via web interface:
Select Network->Advanced-> Registration random, enter the time in the field.
Note:
Should the IP PBX (SIP registrar) require an authentication, you will be prompted to
enter the correct password. Make sure you are using the appropriate input method
or enter the password via the web user interface.
Configuring via keypad
Network Settings: Press MENU->Settings->Advanced, enter the password, and
select Network->WAN Port/PC Port /VLAN/Web Type/802.1x Settings to enter
the internet relating configuration page.
Account Settings: Press MENU->Settings->Advanced, enter the password, and
select Accounts->OK to configure the account settings.
Users can refer to "Configuring via Web Page" for the parameter details.
6
Account password provided by ITSP.
SIP server address provided by ITSP.
Getting Started
Advertisement
Table of Contents
