Conduit Size - Calculated Industries ElectriCalc Pro User Manual

(cont'd)
KeysTRoKe
4. Find 125% Load:
   
5. Display percent used:

6. Reset Overload rating and Clear:
    

CONDuIT SIZE

The ElectriCalc Pro can calculate the size of Conduit required
when running single or multiple Wires using the 
calculator's internal tables. The calculator uses NEC values for area
of THW/THHW, XHH/XHHW, and THHN/THWN wires. When using
the actual Wire areas (and following the guidelines in NEC Chapter
9, Tables 1, 4 and 5), the calculator can calculate a Conduit Size
based on the Conduit Type and the same or different Wire Types
and Sizes.
To select a specific Conduit Type, enter the corresponding number
of the Conduit as shown below and then press  
The types and their corresponding numbers are:
1) eMT
2) enT
3) fMC
When you enter a new Conduit Type or scroll through the types,
you will see the updated Conduit Size (if you have entered the
Wire Type and quantity).
48 — e c
lectri
4) IMC
5) lfnb
6) lfna
P
®
alc ro
7) lfMC
8) RMC
9) P-80
DIsPlay
aMPs 24. o l
%flC 125.
%
0.
key and the

.
10) P-40
11) P-a
12) P-eb