Using M; Using Memory Storage Keys (M1- M9) - Calculated Industries ElectriCalc Pro User Manual

(cont'd)
Memory is semi-permanent, clearing only when you do one of
the following:
– turn off the calculator
– press  
– press  
– press   (Clear All).
When memory is recalled ( ), consecutive presses of
  will display the calculated Average and total Count of the
accumulated values.

using M+

KeysTRoKe
    
    
      
 
 
 
 

using Memory storage Keys (M1- M9)

In addition to the standard cumulative Memory (as previously
described), your calculator has nine independent Storage
Registers – M1 through M9 – that can be used to permanently
store single, non-cumulative values. The following example
shows the use of M1 ( ). To use M2 through M9, replace
the presses of the  key with presses of the corresponding
number key ( through ).
You can replace a value in one of these Memory registers by
storing a new value in place of the stored value.
20 — e c
lectri
(M+)
(M+)
(M+)
P
®
alc ro
DIsPlay
M+ 355.
&
M+ 255. &
M+ –745.
&
TTl – 135.
&
aVG – 45.
&
CnT 3. &
– 135.