Lava Rock And Glowing Ember Placement - Majestic PEARL36STIN Installation Manual

Pearl ii series
Hide thumbs Also See for PEARL36STIN:
Table of Contents

Advertisement

D. Lava Rock and Glowing Ember Placement
Lava Rock and Glowing Embers
Place lava rock and glowing embers as shown in Figure
11.13.
WARNING! Risk of Explosion! Follow ember placement in-
structions in manual. DO NOT place embers directly over
burner ports. Replace ember material annually. Improperly
placed embers interfere with proper burner operation.
Placing the Ember Material
Ember material is shipped with this gas appliance. To place
the ember material:
• Embers may only be placed in areas as shown in Figure
11.13. Care should be taken not to cover the lighting trail
of ports near pilot assembly as shown in Figure 11.13.
• When placing Glowing Embers
should be taken so that the ports are not covered. Place
the dime-size ember pieces. See Figure 11.13. Failure
to follow this procedure will likely cause lighting and
sooting problems.
• Place Lava Rock on areas of base pan away from the
burner. Use this material to give the appliance a realistic
ash bed.
• Save the remaining ember materials for use during
appliance servicing. The embers provided should be
enough for 3 to 5 applications.
Figure 11.13 Placement of Embers
60
Majestic • PEARL36STIN, PEARL36PRIN Installation Manual • 2478-980 Rev. C • 3/17
onto the burner, care
®
= LAVA ROCK
= EMBERS
= NO EMBERS IN THESE AREAS
= LOG PLACEMENT PINS
Do not cover log placement pins
with lava rock or glowing embers.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pearl36prin

Table of Contents