Procedure - Impediment RS-0800-LVD User Manual

RS--0800-LVD User Guide

2.9.2 Procedure

1 Release the carrier handle, by pressing the latch in the handle towards the right and insert the carrier into
the enclosure
Important For a Rack Mounted System: Ensure that the carrier is orientated so that the drive is uppermost
and the handle opens from the left.
2 Slide the carrier, gently, all the way into the enclosure until it is stopped by the camming lever on the right
of the carrier
3 Cam the carrier home - the camming foot on the base of the carrier will engage into a slot in the enclosure.
Continue to push firmly until the handle fully engages. A click should be heard as the latch engages and
holds the handle closed
Figure 2–10 Installing an Ultra-320 SCSI Drive Carrier Module (1)
26
(Figure 2–10).
(Figure 2–11)
(Figure
Note: Ensure that the handle always opens from left.
2–12).