The Enclosure Core Product; Enclosure Chassis - Impediment RS-0800-LVD User Manual

RS--0800-LVD User Guide

1.2 The Enclosure Core Product

The RS-0800-LVD enclosure design concept is based on a subsystem together with a set of plug-in
modules.
The RS-0800-LVD subsystem as supplied comprises:
• Chassis and Backplane with integral status indicator LEDs.
• Power Supply plug-in modules, in accordance with your required configuration (see
• Cooling plug-in module (see
• Ultra-320 SCSI Input/Output module. (See
• optional Loopback module
• Ultra-320 SCSI Drive Carrier modules and associated dummy carrier modules (see
• Blank modules, as required to complete your planned configuration and installation.

1.2.1 Enclosure Chassis

The chassis consists of a sheet metal enclosure assembly containing a Backplane PCB and module
runner system.
The chassis assembly contains 8 drive bays at the front, each of which accommodates a plug-in drive
carrier module. The 8 drive bays are arranged in 2 rows of 4 drives. At the rear, the chassis assembly
contains 6 module bays to house Power Supply modules, Cooling modules and SCSI I/O modules.
The Backplane PCB provides logic level signal and low voltage power distribution paths.
Figure 1–3
• The chassis is fitted with 19 inch Rack mounting features which enables it to be fitted to standard 19
Figure 1–2 Enclosure Chassis (Front)
Figure 1–3 Enclosure Chassis (Rear, 2 x 4 I/O Modules fitted)
2
show front and rear views of an RS-0800 chassis respectively.
inch racks and uses 2EIA units of rack space.
Figure 1–9
Figure 1–10).
Figure 1–7).
Figure 1–15).
Figure 1–2 and