Cylinder Head (I) Disassembly - Mazda 2006-2008 RX7 Engine Workshop Manual

CYLINDER HEAD (I) DISASSEMBLY

1. Disassemble in the order indicated in the table.
WITH VARIABLE VALVE TIMING MECHANISM
2
*: IF WASHER IS NOT INSTALLED TO THE ENGINE, INSTALL A NEW WASHER.
1 Camshaft sprocket lock bolt, variable valve timing
actuator lock bolt (With variable valve timing
mechanism)
(See 01–10–7 Camshaft Sprocket Lock Bolt,
Variable Valve Timing Actuator Lock Bolt
Disassembly Note .)
2 Camshaft sprocket, variable valve timing actuator
(With variable valve timing mechanism)
3 Oil control valve (OCV) (with variable valve timing
mechanism)
01–10–6
Engine Workshop Manual LF L3 (1866–1U–05H)
MECHANICAL
.
3
4
*
R
1
4
5
*
2
R
6
*
R
4 Camshaft cap
(See 01–10–7 Camshaft Cap Disassembly Note.)
5 Camshaft
6 Tappet
(See 01–10–7 Tappet Disassembly Note.)
7 Cylinder head bolt
(See 01–10–8 Cylinder Head Bolt Disassembly
Note.)
8 Cylinder head
9 Cylinder head gasket
7
8
9 R
Revised 12/2005 (Ref. No. R145/05)
E5U011002000E04
E5U110ZECL01