Download Print this page
Mazda 2006 MX-5 Service Bulletin
Mazda 2006 MX-5 Service Bulletin

Mazda 2006 MX-5 Service Bulletin

Mazda automobile parts user manual
Hide thumbs Also See for 2006 MX-5:

Advertisement

Quick Links

Service Bulletin
© 2006 Mazda Motor of America, Inc.
Subject:
CENTER CONSOLE LID WILL NOT STAY CLOSED
2006 MX-5 - CENTER CONSOLE LID WILL NOT STAY CLOSED
APPLICABLE MODEL(S)/VINS
2006 MX-5
DESCRIPTION
On some vehicles, the center console lid may not stay in the closed position due to a broken latch.
Customers having this concern should have the console lid replaced using the following repair procedure.
REPAIR PROCEDURE
1. Verify customer concern.
2. Remove the center console from the vehicle. Refer to Workshop Manual section 09-17 CONSOLE
REMOVAL / INSTALLATION.
3. Remove the cup holder from the center console. Refer to Workshop Manual section 09-17 CONSOLE DIS-
ASSEMBLY / ASSEMBLY.
4. Slide open center console lid fully to rear position.
5. Identify rear guides for console lid.
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by "do-it-yourselfers." Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
Mazda North American Operations
Irvine, CA 92618-2922
CENTER CONSOLE LID
REAR GUIDES
1653a
Bulletin No:
Last Issued:
FRONT GUIDES
09-033/06
7/21/2006
Page 1 of 5

Advertisement

loading

Summary of Contents for Mazda 2006 MX-5

  • Page 1 5. Identify rear guides for console lid. CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/ equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern.
  • Page 2 Bulletin No: 09-033/06 Last Issued: 7/21/2006 © 2006 Mazda Motor of America, Inc. 6. Using a flat-tipped screwdriver, slide guides rearward to disengage tabs from sides of cup holder assembly as shown. PLACE FLAT TIPPED SCREWDRIVER INTO SLOT AND SLIDE GUIDE TOWARD REAR...
  • Page 3 Bulletin No: 09-033/06 © 2006 Mazda Motor of America, Inc. 9. Remove guides from old console lid. NOTE: • Make note of sides of cup holder assembly guides are removed from for installation. Guides cannot be installed backward or on opposite sides. Attempting to do so may damage the guides and/or the cup holder assembly.
  • Page 4 Bulletin No: 09-033/06 © 2006 Mazda Motor of America, Inc. 12. Carefully lay lid and guides down to line up remaining tabs. 13. Using a flat-tipped screwdriver, slide guide forward to engage tabs to sides of cup holder assembly. INTO SLOT AND SLIDE GUIDE TOWARD 1653h 14.
  • Page 5: Warranty Information

    Bulletin No: 09-033/06 © 2006 Mazda Motor of America, Inc. 15. Press down on rear of guides to ensure they are properly seated into cup holder assembly. 16. Install cup holder to center console. 17. Install center console to vehicle.