Answering A Call - Nortel i2050 User Manual

Basic Functions of the i2004 Internet Telephone

Answering a Call

The calling party' s name and number, if available, will be displayed on incoming
calls if the telephone is idle (if the phone is holding a call, not on an active call,
receiving Caller ID from another call, or in a functional area such as the
Directory). In some instances, only the number will be displayed.
If the telephone is idle
1. Answer the call by performing one of the following actions:
• Lift the handset.
• Press the LINE key for the incoming call.
• Press the HANDSFREE key.
• Press the HEADSET key.
2. Press GOODBYE to end the call.
Incoming calls will ring the set and display a ringing phone on the LINE key.
If you are on another call, the new name and number will display for three
seconds after the first ring, then revert to the current call' s display (see Figure
13).
While on another call
1. Answer the new call by pressing the LINE key for the incoming call.
2. Your first caller will be automatically placed on hold, and your display will show the new
caller.
3. Press GOODBYE to end the current call, or press HOLD to place this caller on hold.
4. Press the appropriate LINE key to return to either caller.
A short tone is heard to alert you to another incoming call.
Internet Phone User Guide
21
Nortel Networks