Make And Answer Calls; Make A Call - Nortel T7406 Installation Manual

42 / Make and Answer Calls

• To receive Message Waiting Indication (MWI) when the handset
is in Handset Asleep mode, press any button on the dialpad to wake
up the handset.
• If the Ring Again feature is active, and the handset goes into
Handset Asleep mode, there is no indication of the Ring Again
feature until you press a button on the dialpad to wake up the
handset. To use the Ring Again feature, press any button on the
dialpad to wake up the handset.
Note: When the handset is awake, the Ring Again feature
provides both an audio and a visual indication that the
feature is active.
• If the Do not disturb (DND) feature is active when the handset is in
Handset Asleep mode, there will be no visual notification of
incoming calls, including Priority calls.
Priority calls when DND is active: When the handset is in
Handset Asleep mode and a Priority call is made to the T7406,
it appears to the caller that the Priority Call was successfully
connected, even though you receive no indication on your
T7406 handset. As soon as you wake the handset, whenever
you have DND set, you must always press the line or intercom
button and the ® button. This ensures that your handset
provides proper audible and visual Ring Notification.
Make and Answer Calls
This section provides a brief overview of how you use the handset to
make and answer calls.

Make a call

Use intercom and extension buttons to make internal calls. See your
system administrator for a list of numbers.
To make a call:
1. Press an intercom or line button.
2. After the button lights, enter your system external line access
code or line pool access code.
P0606142 01