Step 4: Run The I2050 Configuration Tool - Nortel i2050 User Manual

Installing the i2050 Software Phone

Step 4: Run the i2050 Configuration Tool

You configure the i2050 Software Phone using the i2050 configuration utility.
To start the configuration utility, select the following from the Start menu:
Start>Programs>Nortel Networks>i2050 Software Phone>Configuration
Tool
The configuration utility has nine tabs listed below. You will need to check your
settings for the tabs shown in boldfaced.
• Communications Server
• Select Sound Devices
• ServerType
• QoS
• Hardware ID
• Advanced Audio
• Listener IP
• Trace
• About
Configuration Tool Tab - Communications Server
If your site uses DHCP:
1. Select the Obtain server address automatically option.
Note: To use DHCP, you site needs a DHCP server with communications
server IP address values programmed as per the i2004.
If your site is not using DHCP:
1. Select the Use the following server address information option.
Enter the IP address and port number of the communications server provided
by your system administrator.
Note: Using DHCP may not be appropriate for mobile users. These users
commonly want to connect to their office communications server rather
than the local office server.
Internet Phone User Guide
35
Nortel Networks