Beeper - CipherLab 1166 User Manual

1.4 BEEPER

The scanner has a buzzer to provide user feedback in various operating conditions.
Beeping
One long beep, high tone
One short beep, high tone
Programmable, default to 4 KHz
Six short beeps
High-low tone repeats three times
Two beeps, high-low tone
One short beep, high tone
One long beep, low tone
Three short beeps, tone ascending from
low to high
Three short beeps, tone ascending from
high to low
Three short beeps, low tone
Chapter 1 Understanding the Barcode Scanner
Meaning
Power on, with red LED on (1 second) and off quickly
Good Read, with red LED on and off quickly
Enter Configuration Mode, with blue LED on
Exit Configuration Mode
Setup barcode read successfully
More setup barcode required
Configuration error (Wrong barcode...)
WPAN connection
flashing (On/Off ratio 1:6)
WPAN connection resumed, with blue LED flashing
(On/Off ratio 1:6)
WPAN connection out of range
WPAN connection suspended for RF Auto-Shutdown
(via 3666 only)
No WPAN connection
Transmit buffer full
Memory Mode – Memory full
Update
established, with blue LED
25