Enter Configuration Mode; Exit Configuration Mode - CipherLab 1166 User Manual

ENTER CONFIGURATION MODE

For the scanner to enter the configuration mode, you must have it read the "Enter Setup"
barcode, which can be located at the bottom of almost every even page of this manual.
The scanner will respond with six beeps and its LED indicator will become solid blue
after reading the barcode.
For configuring scanner parameters, see "Read a Setup Barcode" below.

EXIT CONFIGURATION MODE

For the scanner to save settings and exit the configuration mode, you must have it read
the "Update" barcode, which can be located at the bottom of almost every odd page of
this manual. If you want to exit the configuration mode without saving any changes,
have the scanner read the "Abort" barcode instead.
Just like reading the "Enter Setup" barcode, the scanner will respond with six beeps
and its LED indicator will go off after reading the barcode. Wait for a few seconds for
the scanner to restart itself.
Enter Setup
Update
Update
Abort
Quick Start
11