EXAMPLE
KEY TYPE = NORMAL
For example, if you want to program the character "!" as the prefix code:
1.
Read the "Configure Prefix" barcode.
2.
Read the
"Hexadecimal
3.
Read the "Validate" barcode to complete this setting.
KEY TYPE = SCAN CODE
For example, if you want to program the character "a" (= "1C" on the scan code table) as the
prefix code:
1.
Read the "Configure Prefix" barcode.
2.
Read the "Scan Code" barcode.
3.
Read the
"Hexadecimal
4.
Read the "Validate" barcode to complete this setting.
KEY TYPE = NORMAL + KEY STATUS = SHIFT
For example, if you want to program the character "!" (= "Shift" + "1" on keyboard) as the prefix
code:
1.
Read the "Configure Prefix" barcode.
2.
Read the "Add Shift" barcode.
3.
Read the
"Hexadecimal
4.
Read the "Validate" barcode to complete this setting.
Value" barcode on page 166 for "2" and "1".
Value" barcode o on page 166 for "1" and "C".
Value" barcode on page 166 for "3" and "1".
Appendix III
Keyboard Wedge Table
Update
163
Need help?
Do you have a question about the 1166 and is the answer not in the manual?