Auto Off Mode; Auto Power Off Mode; Alternate Mode - CipherLab 1166 User Manual

1.5.4 AUTO OFF MODE

The scanner will start scanning once the trigger is pressed.
The scanning won't stop until (1) a barcode is decoded, and (2) the pre-set timeout
expires.
Note: Refer to "Scanning Timeout".

1.5.5 AUTO POWER OFF MODE

The scanner will start scanning once the trigger is pressed.
The scanning won't stop until the pre-set timeout expires, and, the pre-set timeout
period re-counts after each successful decoding.
Note: Refer to "Delay between Re-read" and "Scanning Timeout".

1.5.6 ALTERNATE MODE

The scanner will start scanning once the trigger is pressed
The scanning won't stop until you press the trigger again.
Chapter 1 Understanding the Barcode Scanner
Auto Off Mode
Auto Power Off Mode
Alternate Mode
Update
29