Draytek Vigor2960 Series User Manual page 73


If you choose DHCP-IA_NA as IPv6 protocol type, click the DHCPV6 Tab to open
the following page:
Available parameters are listed as follows:
Item
DHCP (IA_NA)
Gateway Address
DHCP (IA_NA)
DNS Address
Apply
Cancel

If you choose DHCP-IA_PD as IPv6 protocol type
It is not necessary for you to configure any web page.
5. After finished the settings configuration, click Apply to save and apply the settings.
4 . 1 . 1 . 2
4 . 1 . 1 . 2
Open WAN>>General Setup and click the USB WAN tab.
Vigor2960 Series User's Guide
Description
Type the gateway IP address for IPv6 DHCP IA_NA mode.
Add – Click this button to type primary DNS server address
for IPv6.
Save – Click this button to save the setting.
Click it to save the configuration and exit the dialog.
Click it to exit the dialog without saving the configuration.
U S B W A N P r o f i l e s
U S B W A N P r o f i l e s
– Click the icon to remove the selected entry.
65