Draytek Vigor2960 Series User Manual page 66

MTU/MRU
Connection
Detection Mode
Connection
Detection Host
Connection
see and choose it in later web page settings (e.g.,
NAT>>Port Redirection.
Add – To add a new IP address, click Add. Type the IP
address and use the drop down list to specify the subnet
mask. Next, click Save. The new one will be added and
displayed on the field under the box.
Save – Click this button to save the setting.
– Click the icon to remove the selected entry.
It means Max Transmit Unit for packet. The default setting
is 1500.
Select a detecting mode for this WAN interface. There are
three ways ARP, PING and HTTP supported in Vigor
router for you to choose to send the request out.
Add – click this button to have a field for adding a new IP
address. Assign an IP address or Domain name as a
destination to be detected whether the host is active (sending
reply to the router) or not. If not, the connection of WAN
interface will be regarded as breaking down. This function is
available when Connection Detection Mode is set with
PING or HTTP.
Save – Click this button to save the setting.
– Click the icon to remove the selected entry.
Assign an interval period of time for each detecting.
58
Vigor2960 Series User's Guide