Reboot System - Draytek Vigor2960 Series User Manual

Manager Host IP/Mask
Apply
Cancel
4 . 1 4 . 8 R e b o o t
4 . 1 4 . 8 R e b o o t
The Vigor router system can be restarted from a Web browser. You have to reboot the router
to invoke the configured settings that you made before.
If you want to reboot the router using the current configuration, choose Reboot with
Current Configurations and click Reboot. To reset the router settings to default values,
click Reboot with Factory Default Configurations and click Reboot. The router will take
a period of time to reboot the system.
Open System Maintenance>> Reboot System.
Available parameters are listed as follows:
Item
Reboot with Current
Configurations
Reboot with Factory
Default Configurations
Reboot with Customized
Configurations
Vigor2960 Series User's Guide
the SNMP agent.
If you click Disable, you need to type the IP address and
choose the mask manually in related fields.
Type the IP address for the manager host.
Click this button to save the configuration and exit the web
page.
Click it to discard the settings configured in this page.
S y s t e m
S y s t e m
Description
Click it to reboot the router using the current
configuration. Then, click Reboot..
Click it to reset the router settings to default values. Then,
click Reboot.
Click it to reboot the router using the current configuration
(only the configuration settings listed and selected below). If
you choose this option, Select Config File will be available
for you to select.
333