Draytek Vigor2960 Series User Manual page 263

LDAP profiles
LAN Profile
NetBIOS Naming
Packet
Apply
Cancel
4 . 8 . 4 . 2
4 . 8 . 4 . 2
This page display current status for VPN tunnel built with L2TP protocol.
Available parameters are listed as follows:
Item
Authenticate Protocol
Vigor2960 Series User's Guide
Choose a LDAP profile for PPTP Server if LDAP is selected
as user authentication type.
To clear the selected one, click
selections.
Choose a LAN profile for PPTP Server if RADIUS or
LDAP is selected as user authentication type.
Pass – Click it to have an inquiry for data transmission
between the hosts located on both sides of VPN Tunnel
while connecting.
Block – When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Click it to save the configuration.
Click it to discard the settings configured in this page.
L 2 T P
L 2 T P
Description
The router will authenticate the dial-in user with the
protocol selected here.
255
to remove current object