Service Type Group - Draytek Vigor2960 Series User Manual

Item
Source Port End
Destination Port
Start
Destination Port
End
Apply
Cancel
4. Enter all the settings and click Apply.
5. A new Service Type Object profile has been created.
4 . 5 . 4 S e r v i c e T
4 . 5 . 4 S e r v i c e T
This page allows you to bind several service types into one group.
To manage conveniently, several service type profiles can be grouped under a service type
group. Different service type group can contain different service type profiles.
Each item will be explained as follows:
Vigor2960 Series User's Guide
Description
It is available for TCP/UDP protocol. It can be ignored for
ICMP. Type a port number (0 – 65535) as the ending source
port.
It is available for TCP/UDP protocol. It can be ignored for
ICMP.
Type a port number (0 – 65535) as the starting destination
port.
It is available for TCP/UDP protocol. It can be ignored for
ICMP. Type a port number (0 – 65535) as the ending
destination port.
Click it to save the configuration.
Click it to exit the dialog without saving anything.
y p e G r o u p
y p e G r o u p
173