Installation Procedure; Removal, Installation & Maintenance Of Rear Bumper; Preparations; Precautions - Chery S18D Service Manual

Chery S18D Service Manual
3.5. Remove the left and right fog lamp wiring
harness connectors, remove the front bumper
(the front bumper is connected and fixed with
the fender by clip; do not break the clip during
removal of bumper).
3.6. Remove the two fixing bolts of upper air
intake grille with cross screwdriver to remove
the air intake grille.
3.7. Use plastic screwdriver to pry out the edges
of lower air intake grille to remove it.
Note: the air intake grille can be replace directly
without removing the lower bumper.

4. Installation Procedure

The installation procedures are reverse to those
for removal.
II. Removal, Installation & Maintenance of Rear Bumper

1. Preparations

Tools: cross screwdriver, slotted screwdriver, socket wrench and etc.
Parts: expansion bolt

2. Precautions

2.1. Wear necessary appliance for labor protection to prevent from accidents.
2.2. Try to avoid scratching the painted surface of the bumper when removing it.

3. Removal Procedure

3.1. Open the luggage boot lid and use a cross
screwdriver to loosen off the four fixing
screws on the rear bumper.
27