Saeco RUBINO 200 Operation And Maintenance page 42

English
No. Description
L or M or HL or HH
0
1
2
3
4
5
6
7
8 HL and HH
9
10 L and M and HL and HH
11 L and HL or L and HH
12 L or HL and HH
13
14 L and M and HL
15 Never (change always available)
Notes
Even if the no change available message is
displayed, the vending machine continues to give
change as long as coins are present in the
channels. The minimum level (the same for all
channels) can be set on a special menu item.
• Channel minimum level
It enables setting of the minimum number of
coins in the channels. Default = 4.
• Manual channel loading
It allows the change-giving coiner channels to
be filled manually. Press Esc to exit the channel
loading mode.
• Manual channel emptying
It allows the change-giving coiner channels to
be emptied by pressing the beverage selection
buttons.
• Committed to vend
By setting 'N', the credit inserted can be returned
even if no sale has been made. This function
may be useful, for example, for changing
banknotes into coins. By setting 'Y', the credit
inserted can be returned as change only after
the sale has been completed. Default = YES.
• Enable banknotes
It enables selection of which banknotes will be
accepted by the MDB banknote reader. By setting
'Y' a specific banknote will be accepted. On the
contrary, the 'N' setting prevents the banknote
reader from accepting a specific banknote.
Default = All enabled.
42
For more information visit www.Gumball.com | 800-260-0010 | +1-214-550-5079
L or M
HL or HH
L or HH
L
M
HL
L and HH
L and M
HH
• Banknotes escrow
By setting 'Y', an inserted banknote is stored in
the escrow position (if the banknote reader
supports it); this function is supported by the
banknote reader. In this way, if the sale fails or
the card system fails to charge, the banknote
will be returned. By setting 'N', any inserted
banknote goes to the banknote reader's stacker,
so that the banknotes cannot be returned.
Default = No.
• Slave address
When the vending machine is in Master mode,
this menu enables setting of the address of any
slave connected vending machine. If the vending
machine is in Slave mode, it enables setting of
its address. Possible addresses are 0x40, 0x48
and 0x50. Default = 0x40.
- Maximum credit
It allows the user to set the maximum credit
which can be accepted by the vending machine.
Once this limit has been reached, the payment
systems are disabled so that no more credit can
be accepted. Default = 20.00.
- Multivend
It enables the user to use any residual credit to
purchase other beverages. By setting "N" (no),
the vending machine will store residual credit.
- Overpay Time
It establishes the maximum time (expressed in
seconds) beyond which the vending machine
collects the displayed residual credit. The time
is adjustable at intervals of 10 seconds. Setting
"000" the function is disabled.
- Nation code (displayed only with
"Complete menus" option enabled)
It enables to set the country code, which
corresponds to the international dialling code
(E.g. ITALY = 0039).
- Scale factor
It enables to set the number of fixed zeros of the
credit.
- Point position
It enables to set the position of the decimal point
of the credit.