Saeco RUBINO 200 Operation And Maintenance page 38

English
- Cups dispenser
It allows you to set the use the vending machine
without cup, stirrers and sugar. To effect this' it
will be had to plan No. The vending machine
won't introduce conditions of error tied to such
operations (error 06: Cup bracket not in position).
- Cup key
It allows to enable or disable the key 'beverage
05' (fig. 39) as:
1 - 'No cup': By pressing the No-CUP key before
choosing a beverage allows to have it brewed
without the cup.
After pushing the preselection key, the user has
8 seconds to select the desired product. After
this time the preselection is cancelled.
If CUPS DISPENSER are planned on No, the
voice PRESELECTION won't have shown.
2 - 'Beverage 05': in this case, by pressing this
key the beverage 05 is brewed.
3 - 'Disabled': in this case, by pressing this key
no beverage will be brewed.
- Cup delay (only with complete menus ON)
While loading cups, the cup holder of the vending
machine turns until the new cup column has
activated the cup detection microswitch. This
item enables to set the delay between the
activation of the cup detection microswitch and
the holder motor stop. Adjust this value according
to the cup type used on the vending machine.
The default value is 18.
- Reset validation
It allows to 'RESET' the data in the maintenance
menu (STATISTICS).
- Language
It allows to select the language to be used by
the machine.
- Serial protocol
It allows selecting the protocol to be used by the
vending machine when interacting with the serial
interface (optional).
38
For more information visit www.Gumball.com | 800-260-0010 | +1-214-550-5079
- Modify password
It allows to set a password or to modify the set
one. The password consists of a number
between 0001 and 65536. The 0000 value
(default value) means no password. To set the
password, press the UP and DOWN keys and
confirm using the ENTER key.
- Complete menu
It allows to choose whether the entries of the
programming menu should be shown entirely or
only partially. The least frequently used entries
are highlighted by a frame outlined at 8.2.2 and
can be shown only if in the data 'Y' is set in this
function.